|
Part Number: 1179762L3
CLEI: COMM61ODRA
- An Outside Plant hardened Ethernet aggregation unit that serves up to four Total Access 1100 Series OSP DSLAMs
- Provides the high bandwidth uplinks, Ethernet aggregation functions, fiber and copper system interconnects, and video enabling functions like IGMP proxy and replication multicast
- Provides an array of security features needed to enable and protect triple play service delivery through Total Access 1100 Series OSP DSLAMs
Contact your sales representative for information regarding software
Cables
|
- Used to provide fiber optic Network and Expansion interfaces to the Total Access 1100 Series
|
|
|
- Used to provide fiber optic Network and Expansion interfaces to the Total Access 1100 Series
|
|
|
- Used to provide fiber optic Network and Expansion interfaces to the Total Access 1100 Series
|
|
|
- 6-foot long, Cat 5e, shielded cable with an RJ-45 connector on one end and a female, sealed circular connector on the other
|
|
|
- Used to provide fiber optic Network interfaces to the Total Access 1100F
- 30 meter long, non-armored, loose tube cable composed of 4 fibers and a strength member
- Manufactured with a PG11 strain relief fitting loosely installed on the cable end intended for installation to the Total Access 1100F
|
|
|
- Used to connect a Total Access 1100F to a subtended Total Access
1124/1148 Host DSLAM
- When a Total Access 1100F is installed with four existing Total
Access 1124/1148 DSLAM units, an additional Expansion Cable is required
for the Total Access 1124/1148 Host DSLAM
|
|
|
- Designed to return the 25th POTS circuit from a DLC system to the field protector
- This allows the customer to insert an ADTRAN Total Access 1224 or Total Access 1248 system, which will return ADSL+POTS on pairs 1-24 of the connection cable
|
|
|
- Designed to return the 25th POTS circuit from a DLC system to the field protector
- This allows the customer to insert an ADTRAN Total Access 1224 or Total Access 1248 system, which will return ADSL+POTS on pairs 1-24 of the connection cable
|
|
|
- Designed to extend Total Access 1200 series signals to DLC systems
using a 50-pin amphenol connector with a stub termination
|
|
|
- Designed to extend Total Access 1200 series signals to DLC systems using a 50-pin amphenol connector with a stub termination
|
Fan, Filter and Housings
|
|
| Part Number: 1179771L2 |
CLEI: SIPQ0C1F_ _
|
|
- Incorporates a filter, circuit board, and fans to provide forced
air ventilation for the 3-Slot LPU Chassis and all of its associated
modules
|
|
|
| Part Number: 1179675L1 |
CLEI: VAUCACDD_ _
|
|
- Pre-installed in the Total Access 1200 Series DSLAMs
- Used as a replacement in the event of a Fan Module failure
|
Mounting Bracket
Power Supplies
|
|
| Part Number: 1179771L1 |
CLEI: SIMPED0A_ _
|
|
- Rack mount chassis that houses three 3192 form factor LPUs
|
SFPs
|
|
| Part Number: 1442390G1 |
CLEI: BVL3AFGD_ _
|
|
- Single-mode fiber SFP that plugs into ADTRAN Gigabit Ethernet modules designed to accept SFPs
- Designed for use in Dense Wavelength Division Multiplexing (DWDM) applications
|
|
|
| Part Number: 1442390G2 |
CLEI: BVL3AFHD_ _
|
|
- Single-mode fiber SFP that plugs into ADTRAN Gigabit Ethernet modules designed to accept SFPs
- Designed for use in Dense Wavelength Division Multiplexing (DWDM) applications
|
|
|
| Part Number: 1442351G1 |
CLEI: BVL3AEKD_ _
|
|
- Single-mode fiber SFP that plugs into ADTRAN Gigabit Ethernet modules designed to accept SFPs
- Designed for use in Coarse Wavelength Division Multiplexing (CWDM) applications
|
|
|
| Part Number: 1442351G2 |
CLEI: BVL3AELD_ _
|
|
- Single-mode fiber SFP that plugs into ADTRAN Gigabit Ethernet modules designed to accept SFPs
- Designed for use in Coarse Wavelength Division Multiplexing (CWDM) applications
|
|
|
| Part Number: 1442351G3 |
CLEI: BVL3AEND_ _
|
|
- Single-mode fiber SFP that plugs into ADTRAN Gigabit Ethernet modules designed to accept SFPs
- Designed for use in Coarse Wavelength Division Multiplexing (CWDM) applications
|
|
|
| Part Number: 1442351G4 |
CLEI: BVL3AEPD_ _
|
|
- Single-mode fiber SFP that plugs into ADTRAN Gigabit Ethernet modules designed to accept SFPs
- Designed for use in Coarse Wavelength Division Multiplexing (CWDM) applications
|
|
|
